Changhao Changhao Changhao Changhao Changhao
Insulating Joint, Flange, Butt Welding Fitting, Valve Supplier
Home / Products / Filter Separator and Tanks

product description


1. Developed with advanced technology.

2. Energy saving.

3. High efficiency.

4. Anti-corrosion.

5. Long service life.



Wholly Titanium Chemical Industry Storage Tank

Item No.CH-039



Medium Inside Vessel: Brine

Diameter of Barrel: 2800mm

Working Pressure: Atmospheric pressur

Working Temperature: 80-100°C

Volume of Vessel: 40m³

Material of Main Body: Gr1/Gr9


Developed with advanced technology.

Energy saving.

High efficiency.


Long service life.



Seawater, Oil, Food, Distilled Water, Gas industries.


A storage tank is a container, usually for holding liquids, sometimes for compressed gases (gas tank). The term can be used for reservoirs (artificial lakes and ponds), and for manufactured containers.

In the USA, storage tanks operate under no (or very little) pressure, distinguishing them from pressure vessels. Storage tanks are often cylindrical in shape, perpendicular to the ground with flat bottoms,

 and a fixed or floating roof. There are usually many environmental regulations applied to the design and operation of storage tanks, often depending on the nature of the fluid contained within. Aboveground 

storage tanks (AST) differ from underground (UST) storage tanks in the kinds of regulations that are applied.

Reservoirs can be covered, in which case they may be called covered or underground storage tanks or reservoirs. Covered water tanks are common in urban areas.

Storage tanks are available in many shapes: vertical and horizontal cylindrical; open top and closed top; flat bottom, cone bottom, slope bottom and dish bottom. Large tanks tend to be vertical cylindrical, 

or to have rounded corners transition from vertical side wall to bottom profile, to easier withstand hydraulic hydrostatically induced pressure of contained liquid. Most container tanks for handling liquids

 during transportation are designed to handle varying degrees of pressure.


Special features:


Since most liquids can spill, evaporate, or seep through even the smallest opening, special consideration must made for their safe and secure handling. This usually involves building a bunding, or containment dike, around the tank, so that any leakage may be safely contained.

Some storage tanks need a floating roof in addition to or in lieu of the fixed roof and structure. This floating roof rises and falls with the liquid level inside the tank, thereby decreasing the vapor space above the liquid level. Floating roofs are considered a safety requirement as well as a pollution prevention measure for many industries including petroleum refining.

In the United States, metal tanks in contact with soil and containing petroleum products must be protected from corrosion to prevent escape of the product into the environment. The two most effective and common corrosion control techniques for steel in contact with soil is a coating system with cathodic protection.


Product Categories

contact us

Contact Us
Follow Us

Technical Support: